sudo apt-get -y install git-core cmake g++ python-dev swig \
pkg-config libfftw3-dev libboost1.55-all-dev libcppunit-dev libgsl0-dev \
libusb-dev libsdl1.2-dev python-wxgtk2.8 python-numpy \
python-cheetah python-lxml doxygen libxi-dev python-sip \
libqt4-opengl-dev libqwt-dev libfontconfig1-dev libxrender-dev \
python-sip python-sip-dev

sudo apt-get install  libglew-dev libcheese7 libcheese-gtk23 libclutter-gst-2.0-0 libcogl15 libclutter-gtk-1.0-0 libclutter-1.0-0

2- git

git clone --recursive https://github.com/pinkavaj/gnuradio.git

3- make

usual then
cmake -DCMAKE_INSTALL_PREFIX=/usr/local ../

at the end everything is OK

Tetrapol :

apt-get install libcmocka-dev

then standard install

Running ./run.sh gives the following error :

/Documents/tetrapol-kit$ sudo ./run.sh
Traceback (most recent call last):
  File "./demod/tetrapol_rx.py", line 15, in <module>
    from gnuradio.filter import freq_xlating_fft_filter_ccc
ImportError: cannot import name freq_xlating_fft_filter_ccc
a <CHANNEL>    - automatic fine tunning to channel C
d <CHANNEL>    - disable demodulation for channel C
e <CHANNEL>    - enable demodulation for channel C
h              - print help
l              - list top 30 channels by PWR
x              - exit
Command: x

RTL SDR is not recognize

No further instructions found on internet

some tests :

install Pybombs then gnuradio : error

install gr-osmosdr through pybombs error

Any help in installing this gnuradio version ?

--